Menu

Contact Us
24/7 Service

ACCO Engineered Systems’ operational status and COVID-19 response >
24/7 Service

Automated Logic

Factory Certified Live Instructor eLearning

 

In 2020, Sunbelt Controls developed a method for remotely deploying the same quality of Factory Certified Training Classes that our customers have grown to love: Live Instructor-led eLearning in a virtual Zoom classroom environment. This method of training allows for group exercises and one-on-one instruction with the use of breakout rooms. The instructor is able to see the work that students do remotely as if he was in the room with them enabling real-time feedback.

Students connect securely to a fully outfitted computer and training case with modules and components that are dedicated to their training session. The learning experience is comparable to in-person sessions without the added cost of travel.

 

 

Please see our virtual classroom schedule below for all eLearning classes.

Contact us at (888) 786-2332 to schedule in-classroom or onsite training

 

Sunbelt Controls is proud to be a part of Automated Logic’s Partners in Training program. Our instructors are Factory Certified at the highest Gold level. Our Gold level classrooms are required to meet the same standard as ALC World Headquarters. We have been affiliated with the ALC training department since 2007.

As an owner/operator you have invested in your WebCTRL system, now invest in your employees. Students can earn a certificate for each training class and learn best practices to tune your system for maximum efficiency. The most balanced, comprehensive training will come by following the Owner Operator Certification path found on pages 6 & 7 of the ALC Course Catalog

Our program offers 8 hands-on, task-based Factory Certified training courses. We utilize Automated Logic Corporations’ factory-approved software, hardware, and materials. Training locations include: San Francisco (Pleasanton), Sacramento, Los Angeles (Azusa), San Diego and Las Vegas. We can also teach the same factory certified classes at your facility.

Sunbelt Controls
Guarantee Factory Training
Partnership Contact
Information 5 Training
Locations

Meet our Instructors

Derick Hopkins

Derick Hopkins is an experienced ALC Factory Certified Instructor with a demonstrated history in the construction field. Over the past 22 years, he has transitioned from a field technician with service, start-up and controls experience, to construction supervisor to corporate instructor. Derick has dedicated the later part of his career to breaking down complicated information into smaller principles that students can relate to. Derick covers training in California, Nevada and Seattle.

Owner / Operator 1
Owner / Operator 2
Owner / Operator 3
ViewBuilder 1
Networking 1
Networking 2
Eikon 1
Eikon 2

Owner / Operator 1

(OO-1)

Register
Course Description

After successfully completing this course, you will be able to use Automated Logic’s WebCTRL
interface to quickly and efficiently:

• Navigate WebCTRL
• Setup Users and Privileges
• Create Schedules
• Enable Trends
• Configure Alarms and Actions
• Manage Reports
• Read Logic

  
    
Information
Course prerequisites (pdf) Course Outline (pdf) Owner / Operator Path Certification (pdf)
Date Location
October 6-7, 2022 (CLASS FULL) Virtual Classroom
October 13-14, 2022 (CLASS FULL) Virtual Classroom
October 27-28, 2022 (Thu-Fri) Azusa, CA
November 3-4, 2022 (CLASS FULL) Virtual Classroom
November 17-18, 2022 (Thu-Fri) Azusa, CA
December 1-2, 2022 (Thu-Fri) Virtual Classroom
December 15-16, 2022 (CLASS FULL) Pleasanton, CA

Owner / Operator 2

(OO-2)

Register
Course Description

After successfully completing this course, you will be able to use Automated Logic’s WebCTRL suite to quickly and efficiently:

• Engineer a basic Automated Logic WebCTRL system

• Perform essential system and network troubleshooting
• Use the following WebCTRL applications:

• EIKON
• ViewBuilder
• SiteBuilder
• EquipmentBuilder

After taking OO-1, you can attend either OO-2 or OO-3 next.

  
    
Information
Course prerequisites (pdf) Course Outline (pdf) Owner / Operator Path Certification (pdf)
Date Location
August 10-12, 2022 (Wed-Fri) Virtual Classroom
September 7-9, 2022 (CLASS FULL) Virtual Classroom
October 31- Nov 2, 2022 (CLASS FULL) Pleasanton, CA
November 9-11 (Wed-Fri) Pleasanton, CA
December 7-9, 2022 (Wed-Fri) Virtual Classroom

Owner / Operator 3

(OO-3)

Register
Course Description

After successfully completing this course, you will be able to use Automated Logic’s WebCTRL interface to quickly and efficiently use or adjust:

• Navigate the complete WebCTRL interface
• System Settings
• Manual Commands
• Advanced security
• Advanced trending
• Advanced alarming
• Advanced reporting
• Factory supported Add-Ons
• Edit Source Trees
• Read Logic

After taking OO-1, you can attend either OO-3 or OO-2 next.

  
    
Information
Course prerequisites (link) Course Outline (link) Owner / Operator Path Certification (link)
Date Location
August 24-26, 2022 In-Classroom (Wed-Fri) Pleasanton, CA
September 21-23, 2022 (CLASS FULL) Virtual Classroom
October 19-21, 2022 (Wed-Fri) Virtual Classroom
November 16-18, 2022 (Wed-Fri) Pleasanton, CA
December 21-23, 2022 (Wed-Fri) Virtual Classroom

ViewBuilder 1 (VB-1)

(Formerly ViewBuilder Basic)

Register
Course Description

After successfully completing this course, you will be able to use Automated Logic’s ViewBuilder tool with all the latest features to quickly and efficiently:

• Use all the tools within the ViewBuilder interface
• Create basic equipment and area graphics
• Edit existing equipment and area graphics
• Add graphics to an existing WebCTRL system

  
    
Information
Course prerequisites (pdf) Course Outline (pdf) Owner / Operator Path Certification (pdf)
Date Location
August 8-9, 2022 (Mon-Tue) Virtual Classroom
December 12-13, 2022 (Mon-Tue) Virtual Classroom

Networking 1

(NET-1)

Register
Course Description

After successfully completing this course, you will be able to properly setup and troubleshoot ALC networks.

• ARC156, MS/TP, and IP Basics
• Engineering and editing a SiteBuilder network

• Engineering and editing source trees, and custom trees
• Gathering network diagnostic captures
• Discover BACnet networks, controllers, and objects

At this time, this class will not be able to be taught remotely.

Contact us at 1-888-786-2332 to schedule a class.

  
    
Information
Course prerequisites (pdf) Course Outline (pdf) Owner / Operator Path Certification (pdf)

Networking 2

(NET-2)

Register
Course Description

For Owner/Operators and Technicians needing to design complex network systems.

After successfully completing this course, you will be able to setup complex ALC networks, troubleshoot networks, and create a secure WebCTRL site. Focus is on troubleshooting a WebCTRL system by reading a Wireshark capture.

IP Networks

• Traditional, Daisy Chain & RSTP

Serial Networks

• ARC156 & MSTP

You may attend this course after attending the OO-2 class

  
    
Information
Course prerequisites (pdf) Course Outline (pdf) Owner / Operator Path Certification (pdf)
Date Location
August 31 - September 2, 2022 (Wed-Fri) Virtual Classroom

Eikon 1

(EIK-1)

Register
Course Description

After successfully completing this course, you will be able to use Automated Logic’s EIKON tool to
quickly and efficiently:

• Describe the different types of microblocks

• Read a sequence of operations and translate it to a program

• Simulate a program to find errors

• Define microblock properties

 

At this time, this class will not be able to be taught remotely.

Contact us at 1-888-786-2332 to schedule a class.

  
    
Information
Course prerequisites (pdf) Course Outline (pdf) Owner / Operator Path Certification (pdf)

Eikon 2

(EIK-2)

Register
Course Description

After successfully completing this course, you will be able to use Automated Logic’s EIKON tool to
quickly and efficiently:

• Create basic control programs
• Use programming and naming standards
• Create a symbols library
• Commission a control program
• Use EIKON productivity tools
• Build a properties page
• Make major edits to an existing control program
• Create an advanced control program with a custom sequence of operations

You may attend this course after attending the OO-2 class

  
    
Information
Course prerequisites (pdf) Course Outline (pdf) Owner / Operator Path Certification (pdf)
Date Location
August 3-5, 2022 (CLASS FULL) Virtual Classroom
October 26-28, 2022 (Wed-Fri) Virtual Classroom

Sunbelt Controls Guarantee

A one-time refresher course. Students may retake a class, at our Training Academy, at no charge within six months of completing the initial class.

Automated Logic's Factory Training Program

Sunbelt Controls training center locations and instructors participate in the ALC Factory Partners in Training Program and are recognized as Gold Factory Certified Training Center locations. The Partners in Training Program makes ALC Factory Certified Classes more accessible to customers and the dealers who support them.

Partners in Training locations meet the ALC Factory Training Departments quality standards including the training environment and classroom materials. Instructors are certified in the Best Practices in Training which allows students to build on their classroom experiences. This method promotes higher comprehension and retention of the materials learned.

 

Contact us

Telephone: (888) 786-2332 Press “0” and ask for Training
Email: training@sunbeltcontrols.com

Sunbelt Controls offers 5 training locations:

  • San Francisco Bay Area (Pleasanton)
  • Los Angeles (Azusa)
  • Sacramento
  • San Diego
  • Las Vegas